Get Best Quote
Send E-mail
Send SMS
|
|
Approx. Rs 10 / SetGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Set |
| Material | SS |
| Brand | Guru Engineers |
| Size | Customized |
| Automation Grade | Automatic |
| Power Source | Electric |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Surface Treatment | Powder Coated |
Additional Information:
Production Capacity: as per requirement
Delivery Time: 8 Weeks
Approx. Rs 1,000 / UnitGet Latest Price
Product BrochureProduct Details:
| Minimum Order Quantity | 1 Unit |
| Size | standard |
| Brand | GE |
| Power Source | Electric |
| Temperature | 121 degree celcius |
| Frequency | 50 Hz |
| Surface Treatment | Powder Coated |
| Voltage | 220 V |
The operating cycle of this type of a retort involves bringing the retort up to a temperature of around 121???C. Steam is then allowed to pass through the vessel so that all air in the retort and between the cans is removed (venting) before the retort is finally brought up to the operating pressure and processing temperature. At the end of the processing time, the steam is turned off, and a mixture of cooling water and air is introduced into the retort to cool the cans. The purpose of the air is to maintain the pressure in the retort, following the condensation of the residual steam after the initial introduction of cooling water. The containers may deform because of the pressure difference between inside and outside of the container if this pressure is not maintained.
Steam and Water spray Overpressure Retort with Thermal Process Programmable Logic Controller (PLC) designed for thermal processing all kind of container such as Aluminum Retortable Pouches, Glass Jars, Plastic or Aluminum containers, etc. With directed steam injection, continuous waterspray from top and sides operation guarantee homogeneous heat distribution in the vessel during both sterilizing and cooling. Besides, temperature and overpressure are independently programmable, PID controlled and then recorded by circular chart recorder. Overpressure can be programmed at all time during the heating and cooling for reduced stress on the container seals. Programmes are stored in the memory of the PLC
Additional Information:
Production Capacity: Customized
Packaging Details: Plastic Wrap, Wooden
Approx. Rs 1,000 / NosGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Nos |
| Automation Grade | Automatic |
| Bottle Size | as per Requirement |
| Power Source | Electric |
| Range | 1000 |
| Technique | Retort |
| Temperature | as per requirement |
The operating cycle of this type of a retort involves bringing the retort up to a temperature of around 121¿¿¿C. Steam is then allowed to pass through the vessel so that all air in the retort and between the cans is removed (venting) before the retort is finally brought up to the operating pressure and processing temperature. At the end of the processing time, the steam is turned off, and a mixture of cooling water and air is introduced into the retort to cool the cans. The purpose of the air is to maintain the pressure in the retort, following the condensation of the residual steam after the initial introduction of cooling water. The containers may deform because of the pressure difference between inside and outside of the container if this pressure is not maintained.
Steam and Water spray Overpressure Retort with Thermal Process Programmable Logic Controller (PLC) designed for thermal processing all kind of container such as Aluminum Retortable Pouches, Glass Jars, Plastic or Aluminum containers, etc. With directed steam injection, continuous waterspray from top and sides operation guarantee homogeneous heat distribution in the vessel during both sterilizing and cooling. Besides, temperature and overpressure are independently programmable, PID controlled and then recorded by circular chart recorder. Overpressure can be programmed at all time during the heating and cooling for reduced stress on the container seals. Programmes are stored in the memory of the PLC
Additional Information:
Production Capacity: as per requirement
Delivery Time: 8 Weeks
Packaging Details: Pouches, Bottles , Tin
*Your information is safe with us.
Approx. Rs 11 / NosGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Nos |
| Model Name/Number | Vegetable Washer |
| Usage/Application | Vegetable Washing |
| Capacity | As Per Customer Requirement |
| Industry | Agro Processing Plant |
| Material | Stainless Steel |
| Voltage | Depend |
| Power | Electric |
| Color | Steel |
| Drums Length | Customized |
| Dimension | Customized |
Additional Information:
Production Capacity: as per requirement
Packaging Details: Plastic wrap, wooden
Approx. Rs 1,000 / UnitGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Unit |
| Usage/Application | Use For fruit Washing |
| Capacity | as per requirement |
| Brand/Make | Guru Engineers |
| Industry | Food |
| Frequency | 50 Hz |
| Material Grade | SS |
| Voltage | 220 V |
| Material | Mild Steel |
| Surface Treatment | Powder Coated |
Additional Information:
Production Capacity: as per requirement
Delivery Time: 8 Weeks
Approx. Rs 1 / SetGet Latest Price
Product Details:
| Minimum Order Quantity | 6 Set |
| Usage/Application | Fruit and Vegetable Washing |
| Model Number/Name | GE |
| Capacity | as per requirement |
| Brand/Make | GE |
| Industry | Food |
| Material | SS |
| Drums Length | as per requirement |
| Frequency | 50 Hz |
| Voltage | 220 V |
| Surface Treatment | Powder Coated |
| Power Source | Electric |
Features:
*Your information is safe with us.
Approx. Rs 10 / UnitGet Latest Price
Product BrochureProduct Details:
| Minimum Order Quantity | 1 Unit |
| Usage/Application | washing and cleaning |
| Model Number/Name | GE |
| Capacity | 200 KG/HR |
| Brand/Make | Guru ENgineers |
| Industry | Food |
| Material Grade | SS |
| Power | 3 Phase |
| Applicable Fruits | Pomegranate, Mosambi, Mango and Tomato |
| Automatic Grade | Automatic |
| Usage | Industrial , Commercial, Domestic |
Additional Information:
Delivery Time: 10 week
Approx. Rs 10 / SetGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Set |
| Automatic Grade | Automatic |
| Output | 300-350 kg/hr |
| Machine Type | 3- Stage |
| Brand | Guru Engineers |
| Machine Power | 40-80 |
| Usage/Application | It destroy micro organism which causes food spoilage. Used to Increase shelf life of food product. |
Additional Information:
Item Code: FCP01
Production Capacity: min 200 kg/hr
Delivery Time: within 15 weeks
Approx. Rs 16 / SetGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Set |
| Automation Grade | Automatic |
| Machine Type | Customized |
| Output | Customized |
| Machine Power | 0-40 kw |
| Usage/Application | Process |
| Brand | GE |
Additional Information:
Item Code: GuruEngineers
Production Capacity: as per requirement
Delivery Time: 8 Weeks
*Your information is safe with us.
Approx. Rs 11 / SetGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Set |
| Applicable Fruits | Ready To Eat Food |
| Capacity | Customized |
| Usage/Application | Commercial |
| Automation Grade | Automatic |
| Power | Depend |
| Body Material | Stainless Steel |
| Brand | GE |
The operating cycle of this type of a retort involves bringing the retort up to a temperature of around 121???C. Steam is then allowed to pass through the vessel so that all air in the retort and between the cans is removed (venting) before the retort is finally brought up to the operating pressure and processing temperature. At the end of the processing time, the steam is turned off, and a mixture of cooling water and air is introduced into the retort to cool the cans. The purpose of the air is to maintain the pressure in the retort, following the condensation of the residual steam after the initial introduction of cooling water. The containers may deform because of the pressure difference between inside and outside of the container if this pressure is not maintained.
Steam and Water spray Overpressure Retort with Thermal Process Programmable Logic Controller (PLC) designed for thermal processing all kind of container such as Aluminum Retortable Pouches, Glass Jars, Plastic or Aluminum containers, etc. With directed steam injection, continuous waterspray from top and sides operation guarantee homogeneous heat distribution in the vessel during both sterilizing and cooling. Besides, temperature and overpressure are independently programmable, PID controlled and then recorded by circular chart recorder. Overpressure can be programmed at all time during the heating and cooling for reduced stress on the container seals. Programmes are stored in the memory of the PLC
Additional Information:
Production Capacity: As Per Requirement
Delivery Time: 8 weeks
Approx. Rs 16 / SetGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Set |
| Material | Stainless Steel |
| Size | Customize |
| Brand | GE |
| Automation Grade | Automatic |
| Bottle Size | Customize |
| Power Source | Electric |
The operating cycle of this type of a retort involves bringing the retort up to a temperature of around 121???C. Steam is then allowed to pass through the vessel so that all air in the retort and between the cans is removed (venting) before the retort is finally brought up to the operating pressure and processing temperature. At the end of the processing time, the steam is turned off, and a mixture of cooling water and air is introduced into the retort to cool the cans. The purpose of the air is to maintain the pressure in the retort, following the condensation of the residual steam after the initial introduction of cooling water. The containers may deform because of the pressure difference between inside and outside of the container if this pressure is not maintained.
Steam and Water spray Overpressure Retort with Thermal Process Programmable Logic Controller (PLC) designed for thermal processing all kind of container such as Aluminum Retortable Pouches, Glass Jars, Plastic or Aluminum containers, etc. With directed steam injection, continuous waterspray from top and sides operation guarantee homogeneous heat distribution in the vessel during both sterilizing and cooling. Besides, temperature and overpressure are independently programmable, PID controlled and then recorded by circular chart recorder. Overpressure can be programmed at all time during the heating and cooling for reduced stress on the container seals. Programmes are stored in the memory of the PLC
Additional Information:
Production Capacity: as per requirement
Delivery Time: 2 month
Approx. Rs 16 / SetGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Set |
| Material | Stainless Steel |
| Capacity | Customized |
| Brand/Make | Guru Engineers |
| Power | Steam , Electric |
| Food Processing | Y |
| Size | Customized |
Additional Information:
Item Code: Food
Production Capacity: Customized
Delivery Time: 1 Month
Packaging Details: Plastic wrap, wooden
*Your information is safe with us.
Approx. Rs 11 / nosGet Latest Price
Product Details:
| Minimum Order Quantity | 1 nos |
| Melting Material | SS |
| Material Loading Capacity (T) | Auto, Manual |
| Power Source | Steam |
| Type Of Furnace | Fix |
| Rated Power (KW) | as require |
| Furnace Voltage (V) | depend on temperature |
Additional Information:
Production Capacity: customized
Delivery Time: 8 weeks
Approx. Rs 11 / NumberGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Number |
| Melting Material | Iron |
| Material Loading Capacity (T) | as per Requirement |
| Power Source | STEAM |
| Type of Furnace | Fix |
| Material Loading Capacity | 0-500 kg |
| Rated Power (KW) | as Required |
| Voltage | 220 V |
| Power Consumption | 3 Phase |
| Max Temperature (degree Celsius) | 0-500 degree Celsius, 500-1000 degree Celsius |
| Frequency | 50 Hz |
Additional Information:
Packaging Details: Plastic Wrap, Wooden
|
|
|
|
|
|
|
|
|
|
|
|
